| Materials |
| Core | | LCP+30%G.F UL94V-0 |
| Terminal | | High Conductivity Copper C7025/C2680 |
| Housing | | SUS201/SUS304, T=0.30mm |
| Middle Clamp Piece | | SUS301/SUS201 |
| Electrical Characteristics |
| Rated Current | | 3A/5A |
| Contact Resistance | Initial Value | 40m MAX |
| Contact Resistance | After Test | 50m MAX |
| Insulation Resistance | | 100M MIN |
| Dielectric Strength Test | | 100V AC R.M.S. |
| Mechanical Characteristics |
| Overall Insertion Force | Initial | 5-20N |
| Overall Insertion Force | After Durability | 5-20N |
| Overall Extraction Force | Initial | 8-20N |
| Overall Extraction Force | After Durability | 6-20N |
| Durability | | 10000 cycles |
| Environmental & Special Tests |
| High Temperature Resistance | SMT Reflow Peak (2605) | No blistering, melting, or unacceptable discoloration/warping. |
| Solderability Test | Tin area | 95% or more |
| Salt Spray Test | | 24H MIN |
| Working Temperature | | -30+85 |
| Standard Atmospheric Conditions | Temperature | 5 to 35 |
| Standard Atmospheric Conditions | Humidity | 45% to 85% |
| Standard Atmospheric Conditions | Pressure | 86Kpa to 106Kpa |
| Connection Force | After 3 cycles with standard plug gauge | 0.5-2.0Kgf |
| Disconnection Force | After 3 cycles with standard plug gauge | 0.8-2.0Kgf |
| Terminal Strength | Static Load 0.1N/m (1kgf/cm) for 1 min | No damage (cracks, looseness, play). Electrical and mechanical characteristics satisfied. |
| Contact Resistance | Measured at small current (100mA), 1000Hz | 30m MAX |
| Insulation Resistance | Apply 100V DC for 1 min (between body/conductor, between conductors) | 100M MIN |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min, Trip Current: 0.5mA | No damage, arcing, or breakdown. |
| Solderability Test | Terminal dipped 1mm in solder bath (2505) for 50.5 sec | Solder wetting time 3 sec, Soldering area > 75% |
| Resistance to Soldering Heat Test | Reflow Soldering (Peak 2605 for 20 sec) | No deformation of case, no excessive looseness of terminals. Electrical characteristics satisfied. |
| Resistance to Soldering Heat Test | Soldering Iron Method (3305 for 30.5 sec) | No deformation of case, no excessive looseness of terminals. Electrical characteristics satisfied. |
| Humidity Test | 402, 90%-96% RH for 96 Hr, then 1 Hr at standard conditions | Appearance and characteristics satisfied. |
| Heat Test | 702 for 96 Hr, then 1 Hr at room temp | No damage on appearance. Mechanical and electrical characteristics satisfied. |
| Cold Test | -253 for 96 Hr, then 1 Hr at standard conditions | No damage on appearance. Mechanical and electrical characteristics satisfied. |
| Life Test (No Load) | 10000 cycles at 10-25 cycles/min | Contact Resistance 0.1, Disconnection Force 0.8-2.0N, other characteristics satisfied. |
| Life Test (With Load) | Rating condition (non-inductive load), 10000 cycles at 10-20 cycles/min | Contact Resistance 0.1, Disconnection Force 0.8-2.0N, other characteristics satisfied. |
| Temperature Cycling Test | 5 cycles (details in figure) | No deformation or cracks. Insertion/Extraction Force: 3-20N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Cold & Heat Shock Test | 5 cycles (details in figure) | No deformation or cracks. Insertion/Extraction Force: 3-25N. Contact Resistance: Max.30m. Insulation Resistance: Min.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
