| Material - Core | LCP+30%G.F UL94V-0 | - |
| Material - Terminal | High Conductivity Copper C7025, T=0.15mm; Nickel base 50U" MIN, Gold plated contact area (AU 1u"), Gold plated solder area | - |
| Material - Housing | SUS304, T=0.30mm; Nickel plated surface 50U" MIN | - |
| Material - Middle Clamp | SUS301, T=0.15mm | - |
| Rated Current | - | 5A |
| Contact Resistance (Initial) | - | 40m MAX |
| Contact Resistance (After Test) | - | 50m MAX |
| Insulation Resistance | - | 100M MIN |
| Dielectric Strength | 100V AC R.M.S. | - |
| Insertion Force (Initial) | - | 5-20N |
| Insertion Force (After Durability) | - | 5-20N |
| Extraction Force (Initial) | - | 6-20N |
| Extraction Force (After Durability) | - | 6-20N |
| Durability | - | 10000 cycles |
| High Temperature Resistance | SMT Reflow (Peak 260) | No blistering, melting, discoloration, or warping beyond tolerance |
| Solderability | Soldering area > 95% | - |
| Salt Spray Test | - | 48H MIN |
| Working Temperature | - | -30 ~ +80 |
| Rated Voltage | - | 20V |
| Solder Wetting Time | Dipped 1mm in solder bath 2505 for 50.5 seconds | 3 seconds |
| Solder Area | - | > 75% |
| Resistance to Soldering Heat (Reflow) | Peak 2605 for 20 seconds | No deformation, meets electrical/mechanical characteristics |
| Resistance to Soldering Heat (Iron) | Bit temp 3305, 30.5 seconds | No deformation, meets electrical/mechanical characteristics |
| Humidity Test | 402, 90%-96% RH for 96 Hr | Meets appearance, mechanical, and electrical characteristics |
| Heat Test | 702 for 96 Hours | No appearance damage, meets mechanical/electrical characteristics |
| Cold Test | -253 for 96 Hours | No appearance damage, meets mechanical/electrical characteristics |
| Life Test (No Load) | 10000 cycles at 10-25 cycles/min | - |
| Life Test (With Load) | Rating condition, 10-20 cycles/min | Contact Resistance 0.1, Extraction Force 0.8-2.0N, meets mechanical/electrical |
| Temperature Cycling Test | 5 cycles (Refer to figure) | No deformation/cracks, Insertion/Extraction Force 3-20N, Contact Resistance Max.30m, Insulation Resistance Min.100 M, Dielectric Withstanding Voltage 100VAC |
| Cold & Heat Shock Test | 5 cycles (Refer to figure) | No deformation/cracks, Insertion/Extraction Force 3-25N, Contact Resistance Max.30m, Insulation Resistance Min.100 M, Dielectric Withstanding Voltage 500VAC |
