| Electrical Characteristics | Rated Voltage | (Rated) | 20V DC |
| Rated Current | (Rated) | 3A |
| Contact Resistance | 20mV, 100mA | 40m Max |
| Insulation Resistance | DC 100V, 1 min | 100M Min |
| Withstand Voltage | AC 100V (50-60Hz) for 1 min, Trip Current: 0.5mA | No damage, arcing, or breakdown |
| Mechanical Performance | Insertion Force | (Measurement after 3 cycles using standard plug gauge) | 0.5 - 2.0 Kg |
| Extraction Force | (Measurement after 3 cycles using standard plug gauge) | 0.6 - 2.0 Kg |
| Durability (Mating Cycles) | (No Load) | 5000 Cycles |
| Temperature Range | Operating | - | -30 to +80 |
| Soldering Performance | Solderability Test | Dipped 1mm in solder bath at 2505 for 50.5 sec | Solder wetting time 3 sec; Soldering area 75% |
| Resistance to Soldering Heat (Reflow) | Preheat: 180 (120s); Peak Temp: 2605 ( 20 sec) | No deformation, meets electrical/mechanical specs |
| Resistance to Soldering Heat (Iron) | Bit Temp: 3305; Application Time: 30.5 sec | No deformation, meets electrical/mechanical specs |
| Environmental Tests | Humidity Test | 402, 90%-96% RH for 96 Hr, then 1 Hr at standard conditions | Appearance OK, meets electrical/mechanical specs |
| Heat Test | 702 for 96 Hr, then 1 Hr at room temp | Appearance OK, meets electrical/mechanical specs |
| Cold Test | -253 for 96 Hr, then 1 Hr at room temp | Appearance OK, meets electrical/mechanical specs |
| Temperature Cycling Test | 5 cycles (details in figure) | No deformation/cracks; Insertion/Extraction Force: 3-20N; Contact Resistance: Max 30m; Insulation Resistance: Min 100 M; Withstand Voltage: 100VAC/min |
| Cold & Heat Shock Test | 5 cycles (details in figure) | No deformation/cracks; Insertion/Extraction Force: 3-25N; Contact Resistance: Max 30m; Insulation Resistance: Min 100 M; Withstand Voltage: 500VAC/min |
