| Mechanical | Connection Force | 520N |
| Disconnecti on Force | 820N |
| Terminal Strength | Static Load of 0.1N/m(1kgf/cm) for 1 min | No damage to terminal (cracks, looseness, play); Satisfy electrical and mechanical characteristics. |
| Electrical | Contact Resistance | Measured at small current (100mA or less), 1000Hz | 40m MAX |
| Insulation Resistance | Apply 100V DC for 1 min (between body and conductor; between non-contacting conductors; between non-contacting conductors when plug is inserted) | 100M MIN |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min, Trip Current: 0.5mA (between body and conductor; between non-contacting conductors; between non-contacting conductors when plug is inserted) | Without damage to parts, arcing, or breakdown. |
| Durability | Solderability Test | Terminals dipped 1mm in solder bath (2505) for 50.5 seconds | Solder wetting time 3 sec; Soldering area > 75% |
| Resistance to Soldering Heat Test (Reflow) | Preheat: 180, 120s; Peak Temp: 2605 within 20 sec | No deformation of case or excessive looseness of terminals; Electrical characteristics satisfied. |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit Temp: 3305; Application Time: 30.5 sec (no excessive pressure) | No deformation of case or excessive looseness of terminals; Electrical characteristics satisfied. |
| Humidity Test | Stored at 402 and 90% to 96% RH for 96 Hr, then 1 Hr at standard atmospheric conditions | Appearance, mechanical, and electrical characteristics satisfied. |
| Heat Test | Stored at 702 for 96 hours, then 1 Hr at room temperature | No damage on appearance; Mechanical and electrical characteristics satisfied. |
| Cold Test | Stored at -253 for 96 hours, then 1 Hr at room temperature | No damage on appearance; Mechanical and electrical characteristics satisfied. |
| Life Test | Without Load | 5000 cycles at 10 to 25 cycles/min | Contact Resistance 0.1; Disconnection Force 0.8 to 2.0N; Mechanical and Electrical characteristics satisfied. |
| With Load (Rating Condition, Non-Inductive) | 5000 cycles at 10 to 20 cycles/min | Contact Resistance 0.1; Disconnection Force 0.8 to 2.0N; Mechanical and Electrical characteristics satisfied. |
| Temperature Cycling Test | 5 cycles (70 for 0.5 Hr, 40 for 1 Hr, 0 for 0.5 Hr, -40 for 0.5 Hr) then 30 min at room ambient | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). |
| Cold & Heat Shock Test | 5 cycles (70 for 1 Hr, -20 for 1 Hr) then 30 min at room ambient | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: MAX.30m. Insulation Resistance: MIN.100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
